Setting Clock Time and Date Without iDrive

CLOCK

Setting the time

NOTE: To set the 12h/24hr mode, please refer to: Vehicle/ Instrument Panel, Gauges and Warning Indicators/ Instrument Cluster/Carrier/ Service and Repair/ Procedures/ Formats and Units of Measure without iDrive







1) Push button 1 in the turn indicator stalk up or down repeatedly until the appropriate symbol appears in the display, accompanied by the time and the word "SET".

2) Press button 2.

3) Use button 1 to set the hours.

4) Press button 2.

5) Use button 1 to set the hours.

6) Press button 2 to confirm the entry.

7) Press button 2. The system accepts the new time.


DATE

Setting the Date

To set the dd/mm or mm/dd date format, please refer to: Vehicle/ Instrument Cluster/Carrier/ Service ad Repair/ Procedures/ Formats and Units of Measure without iDrive/







1) Push button 1 in the turn indicator stalk up or down repeatedly until the appropriate symbol appears in the display, accompanied by the date and the word "SET".

2) Press button 2.

3) Use button 1 to set the date of the month.

4) Press button 2 to confirm the entry.

5) Set the month and the year in the same way.

6) Press button 2. The system stores the new date.