Setting Clock Time and Date With iDrive

CLOCK TIME

In the Instrument Cluster

NOTE: To set the 12h/24h mode, refer to the Setting the Time Format procedure down below.






1) Push button 1 in the turn indicator stalk up or down repeatedly until the appropriate symbol appears in the display, accompanied by the time and the word "SET".

2) Press button 2.

3) Use button 1 to set the hours.

4) Press button 2 to confirm the entry.

5) Use button 1 to set the minutes.

6) Press button 2 to confirm the entry.

7) Press button 2. The system accepts the new time.

Via iDrive






1) Press the MENU button once or twice until the start menu appears.







2) Press the controller to open the "i" menu.






3) Turn the controller until "Display Settings" is selected and press the controller.







4) If necessary, move the controller forwards to move the highlight marker to the upper-most field.






5) Turn the controller until "Time" is selected and press te controller.






6) Turn the controller until "Set Time" is selected and press the controller.

Adjusting Settings

7) Turn the controller to set the hours and press the controller.

8) Turn the controller to set the minutes and press the controller.

The system accepts the new time.

Switching on the Hour Signal

You will hear three tones just before each full hour.

Select "Hour Memo" and press the controller.

The hour signal is activated.

Setting the Time Format

1) Open the start menu

2) Press the controller to open the "i" menu.

3) Select "Display Settings" and press the controller.

4) Select "Time" and press the controller.

5) Select "Time Format" and press the controller.

6) Select the desired format and press the controller.

DATE

Setting the Date

In the Instrument Cluster

NOTE: To set the the dd/mm or mm/dd format, refer to the Setting the Date Format procedure down below.






1) Push button 1 in the turn indicator stack up or down repeatedly until the appropriate symbol appears in the display, accompanied by the date and the word "SET".

2) Press button 2.

3) Use button 1 to confirm the entry.

4) Press the button 2 to confirm the entry.

5) Set the month and the year in the same way.

6) Press button 2. The system stores the new date.

Via iDrive

1) Open the start menu.

2) Press the controller to open the "i" menu.

3) Select "Display Settings" and press the controller.







4) Select "Date" and press the controller.

5) Select "Set Date" and press the controller. The first date display setting is selected.

6) Turn the controller to make the adjustment.

7) Press the controoler to apply the setting. The next setting is highlighted.

8) Make the remaining adjustments. After the last adjustment, the date is stored.

Setting the Date Format

1) Open the start menu.

2) Press the controller to open the "i" menu.

3) Select "Display Settings" and press the controller.

4) Select "Date" and press the controller.

5) Select the desired format and press the controller.