PROM - Programmable Read Only Memory: Technical Service Bulletins

• Recalls
  • Emissions
    • Recall 10E-A01 - DME Programming For OBD Communications
      • Overview
      • Attachment - Owner Letter
  • Generals
    • Campaign - Software Update for OBD Communications
  • Safety
    • Recall 12V-502 - Program Control Units (Central Gateway Module
• Customer Interest
  • Engine Controls - Idle Fluctuation/Engine Pinging
  • A/T - MIL ON/Failsafe Mode/Codes 4F81/507B/507C/507D
  • Computers/Controls - TEL Control Module Malfunction Msg
  • BMW Assist(R) - System Inactive Message is Displayed
  • Audio System - Popping/Crackling After Programming
  • Engine Controls - False Low Oil Level Mssg. Displayed
  • Body - Door(s) Won't Latch Properly
  • Engine Controls - A/T Goes Into Failsafe Mode/DTC's Set
  • Bluetooth(R) - Call Displays as Active After Ended
  • Lighting - Automatic Headlamps Don't Switch OFF
  • Engine Controls - Gas Cap Warning Lamp ON/Code 2A17
  • Cell Phone - Can't Initiate a Voice Recognition Call
  • Auxiliary Equipment - Erratic Electrical Malfunctions
  • Instruments - Incorrect Oil Change Interval Mileage
• All Technical Service Bulletins
  • Recall 12V-502 - Program Control Units (Central Gateway Module
  • Computers, Controls - Programming VS Veh. Data Status
  • Engine Controls - Idle Fluctuation/Engine Pinging
  • A/T - MIL ON/Failsafe Mode/Codes 4F81/507B/507C/507D
  • Recall 10E-A01 - DME Programming For OBD Communications
    • Overview
    • Attachment - Owner Letter
  • Campaign - Software Update for OBD Communications
  • Computers/Controls - TEL Control Module Malfunction Msg
  • BMW Assist(R) - System Inactive Message is Displayed
  • Audio System - Popping/Crackling After Programming
  • Progman(R) - Programming/Coding/Individualization
    • Overview
    • General_Rules_For_Programming
    • Procedure_A_Module_Replacement
    • Procedure_B_Software_Update
    • Procedure_C_Troubleshooting
      • Index
      • Introduction
      • Section I: Preparing A Progman Session
      • Section II: Progman Session Initialization
      • Section III: Before Programming/Coding
      • Section IV: After Programming Coding
      • Illustrations and Table
    • Procedure_E_Coding
  • Engine Controls - False Low Oil Level Mssg. Displayed
  • Body - Door(s) Won't Latch Properly
  • Progman(R) - Errors Corrected
  • Engine Controls - A/T Goes Into Failsafe Mode/DTC's Set
  • Bluetooth(R) - Call Displays as Active After Ended
  • Computers/Controls - 'Retrofit' Update Programming
  • Lighting - Automatic Headlamps Don't Switch OFF
  • Engine Controls - Gas Cap Warning Lamp ON/Code 2A17
  • Computers/Controls - Progman(R) V22.0/V22.0.1 Errors
  • Engine Controls - Progman(R) V21.01 and V21.02.01 Errors
  • Cell Phone - Can't Initiate a Voice Recognition Call
  • Auxiliary Equipment - Erratic Electrical Malfunctions
  • Instruments - Incorrect Oil Change Interval Mileage