P3210

2DD7 - P3210

Information saved in
DME

Fault code
2DD7 - P3210

Fault text
No message from DSC

Fault description
CAN Message Monitoring ASC/DSC Plausibility

Condition for fault identification
Test condition:
No suspension of bus activity
Terminal condition: 800 ms after Terminal 15
Voltage condition:
battery voltage >10 V

Condition for fault memory entry
360 ms

Action in service
- Check other ECUs for CAN fault
- Measure resistance on bus
- Check wiring harness Replace defective ECU as indicated

Fault effect and breakdown warning


Driver information
Warning light:
none

Service instruction
none