P1701

50DC - P1701

Information saved in
GS

Fault code
50DC - P1701

Fault text
Transmission position sensor

Fault description
Double Error Position Information CAN / Serial Line

Condition for fault identification
Test condition:
840 msec after ignition ON
Terminal condition: Ignition ON
Voltage condition:
7 ... 16V

Condition for fault memory entry
Filter counter time-controlled

Action in service
Do not replace Mechatronic!
Check selector lever switch.

Fault effect and breakdown warning


Driver information
Warning light:
E-gearshift: CC-ID394
Electr. emergency default program: "Hold Position D,"
no R gear

Service instruction
none