P14C4

2F11 - P14C4

Information saved in
DME

Fault code
2F11 - P14C4

Fault text
Radiator blind, top

Fault description
Radiator Shutter (Upper) Mechanical

Condition for fault identification
Test condition:
Active cooling flap control must be initialized.
Terminal condition: Terminal 15 ON
Voltage condition:
Voltage in onboard electrical system > 10 V

Condition for fault memory entry
up to 20 sec.

Action in service
1. Check whether self-diagnosis fault for active cooling flap
control or passive cooling flap control is entered in FS. (If
yes, start by repairing this.)
2. Check wiring from the DME to the active cooling flap
control
3. Check voltage supply to the active cooling flap control

Fault effect and breakdown warning


Driver information
Warning light:
no external display;

Service instruction
none