P0706

5088 - P0706

Information saved in
GS

Fault code
5088 - P0706

Fault text
Sensors, gearbox selector switch

Fault description
Transmission Range Sensor 'A' Circuit Range/Performance

Condition for fault identification
Test condition:
--
Terminal condition: Ignition ON
Voltage condition:
7 ... 16V

Condition for fault memory entry
Filter counter controlled by time or events

Action in service
If fault is passive: Check shift cable adjustment settings.
Clear fault memory with road test and frequent changes of
selector lever position; if road test is free of problems,
transmission is OK
If fault is active: Check shift cable adjustment settings; clear
fault memory entry; if fault code is registered again: Replace
Mechatronic

Fault effect and breakdown warning


Driver information
Warning light:
M-gearshift: CC-ID420
Electr. emergency default mode

Service instruction
none