2DCA - U1200 (DME)

2DCA - U1200

Information saved in
DME

Fault code
2DCA - U1200

Fault text
No message from EGS

Fault description
Message Monitoring TCM Check Sum Error

Condition for fault identification
Test condition:
EGS vehicle
Terminal condition: 800 ms after Terminal 15
Voltage condition:
battery voltage >10 V

Condition for fault memory entry
20 ms

Action in service
- Check other ECUs for CAN fault
- Measure resistance on bus
- Check wiring harness Replace defective ECU as indicated

Fault effect and breakdown warning


Driver information
Warning light:
US MIL

Service instruction
none