2D32 - P1105 (DME)

2D32 - P1105

Information saved in
DME

Fault code
2D32 - P1105

Fault text
Differential-pressure sensor, intake manifold: plausibility

Fault description
Differential Pressure Sensor Intake Manifold Pressure Too
High (Bank 1)

Condition for fault identification
Test condition:
FI_DPSRPL / E_DPSRPL (Plausmaxfault (DIAG_PSO)
from the EISY_DIAG)
Terminal condition: KL_15 = true
Voltage condition:
none

Condition for fault memory entry
Entered immediately

Action in service
Test sequence (check to determine whether fault is still
present after each step):
1. Check induction tract. HFM is usually entered with other
fault. Remove restriction.
2. Mixture pilot control is usually also entered. Press off
intake tract behind throttle valve.
3. Replace sensor

Fault effect and breakdown warning


Driver information
Warning light:
Standard BMW fault; no MIL,
no scan tool output; no EPCL

Service instruction
none