2CA1 - P0155 (DME)

2CA1 - P0155

Information saved in
DME

Fault code
2CA1 - P0155

Fault text
Oxygen sensor heating before catalytic converter 2

Fault description
O2 Sensor Heater Circuit (Bank 2 Sensor 1)

Condition for fault identification
Test condition:
Sensor ceramic temperature monitor detects reduced heater
performance at oxygen sensor before cat. (no fault in heater
wiring) during heating following engine start and period for
registering operational status
Diagnosis conditions:
- No overrun cutoff
- Off at least 2 min.
- No other O2 sensor faults
Terminal condition: Engine running
Voltage condition:
battery voltage<11V oder Ubatt > 16 volts

Condition for fault memory entry
35 sec.

Action in service
Check plug / wiring harness, replace O2 sensor

Fault effect and breakdown warning


Driver information
Warning light:
MIL on (in 2nd driving cycle)

Service instruction
none