2B64 - P0345 (DME)

2B64 - P0345

Information saved in
DME

Fault code
2B64 - P0345

Fault text
Camshaft sensor 2, intake

Fault description
Camshaft Position Sensor 'A' Circuit (Bank 2)

Condition for fault identification
Test condition:
Flank number within three camshaft revolutions not 0, 1, 11,
12, 13
Terminal condition: Terminal 15=TRUE
Voltage condition:
none

Condition for fault memory entry
5 camshaft revolutions

Action in service
Check voltage supply (T87) + and ground connection for
sensor, signal wire to DME; check sensor installation; if
OK, replace sensor

Fault effect and breakdown warning


Driver information
Warning light:
US: MIL on in 2nd driving cycle
ECE: No MIL
VVT emergency default mode (max. stroke) active
VANOS emergency default mode (spec. 120�) active
Use other NWG as master

Service instruction
none