34 33 505 Removing and Installing/Replacing Brake Booster

34 33 505 Removing and Installing/Replacing Brake Booster


Necessary preliminary tasks:
Remove brake master cylinder
34 31 500 Removing and Installing/Replacing Brake Master Cylinder
34 31 505 Removing and Installing/Replacing Brake Master Cylinder For DSC
Remove ABS/ASC+T hydraulic unit Removing and Installing / Replacing Hydraulic Unit ABS/ASC+T
Remove DSC3 precharging pump Service and Repair
Remove brake pedal 35 21 000 Removing and Installing/Replacing Brake Pedal

Note:
Read and comply with General Information
Sfter completing tasks, bleed brakes Brake Bleeding





Release nuts (1)

Installation:
Replace self-locking nuts.
Tighting torque: 25 Nm





Carefully remove brake unit (1) from bulkhead and tilt out in direction of engine.

Note:
Do not use any force when removing and installing the brake unit; the brake unit can be damaged under certain circumstances.





Remove brake unit vertically upwards out of equipment compartment.