Impact Sensor: Service and Repair

Removing And Installing/Replacing Impact Sensor For Left Or Right Side Airbag

WARNING:
Note airbag safety instructions!
Incorrect handling can activate airbag and cause injury.

- Turn ignition key to 0 position.
- Remove front seat. [1][2]Sedan, Coupe and Wagon
- Remove entrance cover strip.

Saloon/Sedan, Touring:




- Fold up carpet in area of front seat. If necessary, remove rear compartment heating duct.




- Disconnect plug.




- Release screws and remove impact sensor for side airbag.

Installation:
- Arrow (1) on impact sensor for side airbag must point to sill.
- Observe tightening torque: 5.5 Nm

Coupe, convertible, compact:




- Remove cable strap (1).
- Unscrew clip (2).
- Fold up carpet in area of front seat.




- Disconnect plug connection (1).
- Release screws (2) and remove impact sensor for side airbag.

Installation:
- Arrow (3) on impact sensor for side airbag must point to sill.
- Observe tightening torque: 5.5 Nm