Clock: Service and Repair

Setting Clock Time


If you wish to have a permanent time display, you can also make this adjustment in the radio display.
You can adjust the clock and the time display in the car as follows:

Setting

- Before the clock can be set the time must be showing in the instrument cluster display. For additonal information please refer to: Mode Selection.






- With the ignition key in position 1 or higher.

- To set ahead: turn the right button to the right.

- To set back: turn the right button to the left.

- The adjustment speed will increase the longer you continue to hold the right button.

- To change the display mode: press the right button briefly.

- Everytime you press the button, the clock display alternates between the 12 hour and 24 hour mode.

- In ignition key position 0: the time is displayed for a few seconds after you press the left button. For additional information please refer to: Odometer/ Service and Repair/ Procedures/ Odometer Display and Resetting the Trip Odometer.