Repairs and Inspections Required After a Collision: Service and Repair

Procedure after airbag triggering as result of an accident

Check and/or replace following components after airbag triggering:

Satellites (control unit + sensor)
Components
- Satellite, A-/B-pillar, left/right
- Satellite, front door
- Satellite, rear seat
- Satellite, driver's/front passenger seat
- Satellite, vehicle center

Procedure
- Read out fault memory
- Disconnect battery and observe waiting period
- Rectify faults
- Reconnect battery and observe waiting period
- Clear fault memory
- Turn off ignition and wait at least 2 minutes (no consumers may be switched on during this period such as e.g. inside lights, radio, etc.)
- Switch ignition on.
- Clear fault memory and if necessary rectify faults

Cables and plugs
Components and procedure
- Check cables and plugs for damage, replace if necessary.

Belt system
Components
- Automatic safety belt tensioner
- Belt buckle tensioner
- Seatbelt height adjustment

Procedure
- Check components, replace if necessary

Seats
Components
- Seat
- Airbag module
- Active head restraint

Procedure
- Check seats (function check of seat mechanism), replace if necessary
- Check seat screw/bolt connections
- Replace gas generator of active head restraint system
If the severity of the impact has not caused any other damage to the seat, only the triggered gas generator needs to be replaced.
External feature: The triggered head restraint is folded forwards and engaged.
The repair work can be carried out in the car with the rear panel removed. The entire system can be pushed back into its original position and the new gas generator installed.
The gas generator can be replaced up to 5 times.

- Replace airbag module and seat cover with padding

Driver's airbag
Components
- Airbag module
- Steering wheel
- Steering column (if damaged)

Procedure
- Check components, replace if necessary
- Replace steering wheel

Passenger airbag
Components
- Airbag module
- Instrument panel trim
- Supporting tube (if damaged)

Procedure
- Check components, replace if necessary

Side airbag, front/rear
Components
- Airbag module
- Door trim panel
- Door in white
- Seat

Procedure
- Check components, replace if necessary

Head airbag (AHPS)
Components
- Airbag module
- Trim, A-pillar
- Roofliner
- Trim, B-pillar (if damaged)
- Trim, C-pillar (if damaged)
- Bodyshell

Procedure
- Check components, replace if necessary

Knee airbag
Components
- Panel (driver's side)
- Lower section of glovebox
- Active knee protector (driver's and passenger sides)

Procedure
- Check components, replace if necessary

Passive knee protector
Components
- Panel (driver's side)
- Glovebox incl. knee protector (passenger side)

Procedure
- Check components for damage, replace if necessary
- Check fastening elements