Removing and Installing/Replacing Front Left or Right Entrance Cover Strip (Inside) (Coupe)

51 47 000 Removing And Installing/Replacing Front Left Or Right Entrance Cover Strip (Inside) (Coupe)







Using special tool 00 9 318 (universal wedge), lever entrance cover strip (1) at front out of first clip (2) towards top.







Press radius (2) of entrance cover strip (1) downwards and at same time slide forward out of clips.
Remove entrance cover strip (1).







Pull out clips (1) with pliers (head of pliers surface-ground).







Installation:
Push clips (1) onto entrance cover strip (2).

If necessary, replace defective clips (1).