Starter Solenoid: Service and Repair

12 41 041 - Replacing solenoid switch

Turn off ignition.
Remove starter motor.





Release nut (1).
Remove cable lug (2).

Caution!
Do not turn cable lug (2) while tightening down - risk of short circuit to starter motor housing.
Tightening torque, 12 41 4AZ. 12 41 Starter and Mounting Parts





Release screws (1).





Remove solenoid switch (1) and spring (2).
Unhook pin (3).

Installation Note:
Check pin (3) for wear and apply grease.