Removing and Installing/Replacing Fixture For Steering Column Stalk (Up to 09/05)

61 31 006 - Removing and installing/replacing fixture for steering column stalk (up to 09/05)





Warning!
Move wheels into straight-ahead position and do not alter this position during the repair work.





Important!
Read and comply with notes on protection against electrostatic damage (ESD protection) 61 35 ... Notes on ESD Protection (Electro Static Discharge).





Necessary preliminary tasks:
- Remove top section of steering column casing Removing and Installing/Replacing Upper Section of Steering Column Trim.
- If necessary, remove deformation element for steering column trim.





Note:
Comply notes and instructions on handling fiber optic cables 61 00 ... Notes on Handling Optical Fibers.





Release screws (1).
Pull back fixture for steering column switch (2) in direction of arrow.
Disconnect plug connections behind and remove fixture for steering column stalk (2).





Replacement:
- Remove turn indicator/headlight dipping switch Removing and Installing/Replacing Turn Indicator/Headlight Dipping Switch
- Remove windshield wiper switch Service and Repair
- If necessary, remove cruise control switch Service and Repair
- Remove volute spring cassette Service and Repair





Replacement:
- Carry out programming/coding Programming and Relearning
- Vehicles without active front steering:
- Carry out steering angle sensor adjustment Adjustments
- Vehicles with active front steering:
- Carry out active front steering start-up/adjustment.