DVD Player: Service and Repair

Removing And Installing/Replacing DVD Drive For Car Communication Computer

Special tools required:
- 12 7 192
- 64 1 020

Necessary preliminary tasks:
- Remove front trim for Car Communication Computer

IMPORTANT:
Risk of damage.
Place Car Communication Computer on special tool 12 7 192 (antistatic mat) and earth/ground.







Raise cover (1) with special tool 64 1 020 all round and remove from Car Communication Computer (2).







Release screws (1).







Release screws (1).
Feed DVD drive for Car Communication Computer (2) in direction of arrow out of Car Communication Computer (3) and set down.







Disconnect plug connection (1) in direction of arrow.

NOTE: "LIF" stands for Low Insert Force.

Open catch of LIF plug (2) in direction of arrow and feed out cable (3).
Remove DVD drive for Car Communication Computer (5) from Car Communication Computer (4).