Replacing Positive Battery Cable (Battery to Luggage Comp.)

Replacing Positive Battery Cable (From Battery To Luggage Compartment Connector)

WARNING: Observe safety instructions for handling vehicle battery.

Necessary preliminary tasks:
- Remove left luggage compartment wheel arch trim
- Remove right luggage compartment wheel arch trim
- Disconnect battery negative lead







Lever out clips (1).
Release plastic nuts (2).
Remove underlay for luggage compartment floor panel (3).







Disconnect plug connection (1) of IBS cable.
Release nut (3),
Tightening Torque
1AZ Positive battery lead, negative battery lead, safety battery terminal, IBS (screw connection from above)
M6 5 ±1 Nm.

IMPORTANT: Do not under any circumstances pull/lever safety battery terminal (2) off by force.

Detach safety battery terminal (2) towards top, lay to one side and secure.







Unlock cable lug mounting (1) and fold back.
Unscrew bolt (2).
Unclip cable lug mounting (1) from positive battery cable (3) and remove.

WARNING:
Risk of short circuits.
When installing, ensure:
- Correct seating of cable lug mounting (1) on positive battery cable (3)
- Correct screw connection







Unclip positive battery cable (1) from cable guides (2) and remove.