Replacing Battery Positive Lead ( Battery Positive Support )

Removing And Installing Or Replacing Battery Positive Lead (between Alternator, Starter Motor And Battery Positive Support Point) (N62)

Work step Note:
Switch off ignition
Disconnect battery negative lead Follow instructions for disconnecting and connecting battery
Detach battery positive lead from support point.

Remove intake air manifold
Remove fan cowl
Detach battery positive lead from alternator
Release expansion tank
Secure engine in installation position with special tool
Release both engine mounts from above
Lower front axle
Remove right exhaust manifold
Remove heat shield from starter motor
Detach battery positive lead from starter motor


4AZ Electrical leads to starter
M5 5 Nm
M6 7 Nm
M8 13 Nm

Remove battery positive lead