Oil Separator: Service and Repair

Removal and Installation of Oil Strainer for Engine Vent




Oil seperator layout







Oil Separator location on intake manifold.




Crankcase vent system hoses.







Hose routing and connections on the intake manifold.




Hose routing under the intake manifold.




Oil Separator shown with cold climate wrap.


Removal

Remove / Disconnect:

- Air cleaner housing.

- Vacuum hose on intake hose.

- Suction jet pump from bracket.

- Intake hose at idle speed control valve and throttle valve assembly.

- Vacuum line at intake hose.

- Vacuum line at fuel tank vent valve.

- Cable at intake hose.

- Intake hose.

- Manifold cover.

- Vacuum hose at suction jet pump.

- Fuel tank vent valve on support bracket.

- Plug connector at resonance valve.

- Resonance valve on manifold.

- Throttle valve with gasket.

- Plug connector at idle speed control valve.

- Screw connection, cable duct on manifold.

- Screw connection, dipstick guide tube.

- Oil return line at dipstick guide tube.

- Oil seperator block on manifold.

- Hose at oil seperator block.

- Oil return hose at oil seperator.

- Engine ventilation line on cylinder head cover.

- Engine ventilation line on cyclon oil seperator.

- Line at oil seperator.

- Oil seperator on manifold.




- Carefully disconnect crankcase vent hoses and remove the Oil Separator. Be careful to not break connecting clips.

Note: Check crankcase vent hoses and fittings for damage. Replace as nec.


Installation

- Reinstall Oil Separator in reverse order.