Replacing Radial Seal For Output Flange (S5D 200G/250G)

23 12 056 Replacing radial seal for output flange (S5D 200G/250G)
Special tools required:
^ 00 5 010
^ 24 0 110

Caution: After completion of work, check transmission fluid level. Use only approved transmission fluid. Failure to comply with this instruction will result in serious damage to the transmission.

Necessary preliminary tasks:
^ Remove output flange





Remove radial seal with special tool 00 5 010





Installation:
Coat sealing lips of new radial seal with transmission oil. Drive in radial seal with special tool 24 0 110 and plastic hammer until flush.