Coupe

54 12 136 Removing And Installing/Replacing Headliner For Glass Slide/Tilt Sunroof Lid

Installation:
If headliner is difficult to move, apply a light coat of Renax GL1 (manufactured by Fuchs) to guide duct.

Remove glass sunroof lid.







Slowly pull headliner (floating) fully towards front.







Release screws (1) from sliding member (2).

Installation:
Tightening torque, refer to Specifications.







Press headliner (1) to right against springs and at same time detach sliding member (2) from guide duct (3) and headliner (1).







Installation:
Rear sliding member (1) must be fitted behind driver (2).







Pull headliner (1) to left/upwards with sliding members (2) out of rail (3).







Pull sliding member (1) at front/rear off springs (2) of headliner (3).






Installation:
Nubs (2) of spring (1) must snap into place in guides (4) of sliding member (3).