Rear Axle
33 11Rear Differential Case with Cover
1AZ Case Covers
M10 8.8 45 Nm
M10 10.9 55 Nm
3AZ Oil fill and drain plug with sealing ring 65 Nm
8AZ Vibration damper on bracket 77 Nm
9AZ Oil filler and drain plugs with O-ring 60 Nm
33 17
Final Drive Unit Mountings
1AZ Final drive to rear axle carrier
Front 100 Nm
Rear 165 Nm
33 21
Output Shaft
1AZ Output shaft to final drive unit and drive flange
Fillister head bolt
M10 83 Nm
with locking teeth
M10 96 Nm
Note: Replace bolts and washers
M12 110 Nm
Torx bolt
M10 83 Nm
with ribbed teeth Color: BLACK
M10 100 Nm
M8 64 Nm
with ribbed teeth Color: SILVER
M10 80 Nm
Note: Replace screws
M8 52 Nm
with ribbed teeth
M12 135 Nm
33 31
Rear axle carrier
1AZ Vibration damper to rear axle carrier 77 Nm
33 32
Control Arms and Struts
1AZ Trailing arm to rear axle carrier 67 Nm
10.9 77 Nm
Note: tighten in normal position
12AZ Trailing arm to console
M12x1.5 10.9 100 Nm
13AZ Trailing arm console to body 77 Nm
14AZ Upper control arm to rear axle carrier 77 ± 10 Nm
Note: tighten in normal position
15AZ Lower control arm to rear axle carrier 77 ± 10 Nm
Note: tighten in normal position
17AZ Compression strut on body
M8 8.8 21 Nm
M8 10.9 30 Nm
18AZ Auxiliary control arm to trailing arm and rear axle carrier
M14x1.5 127 Nm
Note: tighten in normal position
24AZ Upper control arm to trailing arm
M12x1.5 106 Nm
Note: tighten in empty weight or normal position
25AZ Lower control arm to trailing arm
M12x1.5 10.9 100 Nm
Note: tighten in empty weight or normal position
26AZ Tension strut to compression strut/body
M10 60 Nm
27AZ Heat shield to compression strut
M6 5 Nm
33 33
Rear Axle Suspension
3AZ Rear axle carrier with rubber mounts to body
M12x1.5 77 Nm
M14x1.5 140 Nm
33 41
Wheel Bearings
3AZ Drive flange to axle shaft
M22 200 Nm
Note: Replace and lightly oil collar nut
M24 250 Nm
Note: Replace and lightly oil collar nut
M27 300 Nm
Note: Replace and lightly oil collar nut