Cylinder Block Measurements
Cylinder Bore| Bore a) new or recon. | mm | 84.000 +0.010 |
| 1. Interface - a) (only permitted for aluminum engine block with cast iron liners) a) new or recon. | mm | 84.250 +0.010 |
| Permitted out of round - a) a) new or recon. | mm | 0.005 |
| Permitted conicity of bore - a) a) new or recon. | mm | 0.010 |
| Permitted total wear piston/cylinder | mm | 0.15 |