A5S 310Z Transmission

Checking/Topping Up Oil Level In Automatic Transmission (A5S 310Z)




1. Topping up transmission oil level after a repair:
Selector lever in setting "P".
The vehicle must be horizontal and secured to prevent it from rolling away.
Unfasten filler screw (2).
Installation:
Replace sealing ring.
Tightening torque = 100 Nm.
Top up automatic transmission until oil emerges at filler/overflow bore.
Start engine.
Top up automatic transmission until oil emerges at filler/overflow bore.
Screw in filler screw (2).
Operate brake and change up and down all gears at idle speed.
Connect BMW Diagnosis and Information System (DIS) and/or BMW MoDiC to vehicle and perform oil level check in accordance with instructions.

2. Checking oil level:
Connect BMW Diagnosis and Information System (DIS) and/or BMW MoDiC to vehicle and perform oil level check in accordance with instructions.