Replacing Pressure Regulator For Converter Lockup Clutch

Replacing Pressure Regulator For Converter Lockup Clutch (AS5 360R/390R, A4S 200R)

Note: After completion of work, check transmission fluid lever

Caution: Use only the approved transmission fluid in this automatic transmission.

Failure to comply with this requirement will result in serious damage to the automatic transmission!

Remove/replace shift unit.





Lift out retaining spring.

Withdraw pressure regulator (1) for converter lockup clutch.

Installation:
Coat new pressure regulator (1) for converter lockup clutch with automatic transmission fluid.