Replacing Molded Roof Lining on Hard Top

Removing And Installing/Replacing Molded Roof Lining On Hard Top

Remove hard top.







Detach cover (1) on mounting plate towards front.







Release expansion rivets (1).







Release expansion rivets (1) on left and right.







Release screws (1) and remove cover (2).
Remove panel, rear window frame, bottom.







Pull off molded roof lining (2) from rubber seal at front (1) towards inside.







Raise molded roof lining (1) at rear window and slide towards front.







Installation:
There must be four Velcro-type strips (1) on the hard top and roof lining (2).