Removing and installing/replacing cover strip at entrance, front left or right (Z3 Roadster, M Roadster, Z3 Coupe, M Coupe)
51 47 065 Removing And Installing/Replacing Cover Strip At Entrance, Front Left Or Right (Z3 Roadster, M Roadster, Z3 Coupe, M Coupe)
Unfasten clip (1).
Carefully pull finisher strip, first upwards then forwards to unclip.
If necessary, lift clips off entrance.
Installation:
Soak clips in water for a short time.
Install clips and align.
If necessary, replace damaged clips.
Only replace:
Remove seal (1) from finisher strip (2).