Recall 01V173000: P/S Pump Pulley Bolts Loose

Vehicle Description: Passenger vehicles. Due to an assembly error during vehicle production, any of the three bolts that secure the pulley to the pump may have been inadequately tightened.

In such a case, the bolts could ultimately loosen causing the pulley to throw off the drive belt. This would result in the loss of certain engine auxiliary functions, i.e., power steering assist, water pump, or alternator. Steering effort would then be increased.

Dealers will inspect the power steering pump pulley to see if it is loose. If the pulley is not loose on the pump, the retaining bolts will be torqued to specification. If the pulley is loose, the pump, pulley, attaching bolts, and drive belt will be replaced. Owner notification is expected to begin by the end of June 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact BMW at 1-800-831-1117. Also contact the National Highway Traffic Safety Administration's Auto Safety Hotline at 1-888-DASH-2-DOT (1-888-327-4236).