Fog/Driving Lamp Bulb: Service and Repair

Removing And Installing/Replacing Left Or Right Foglamp Insert







Pull off trim (1).








Loosen screws (1).
Remove fog lamp insert (2) and disconnect plug connection.


Installation: Feed lug of foglamp insert (2) at top into bumper.







Replacement:
Turn cover (1) counterclockwise through approx. 45° and remove.







Pull plug connection (1) out of housing and disconnect.
Press retainers (2) in direction of arrow and remove bulb (3).


NOTE:
Do not touch glass part of bulb with bare fingers. Only touch bulb on its base or with a clean cloth or packaging of light bulb.
Note type of bulb.


Installation Note: Aim front fog lamps.