On-Board Computer

On-Board Computer (High version)
The BC processing is a function of the IKE and can be displayed in the cluster matrix display or on the MID.




The following BC functions are available for display:
- Time/Date
- Arrival Time
- Code
- Two Timers for programming parked car ventilation
- Distance
- Stop Watch
- Range
- Limit
- Average Speed
- Average fuel consumption

Operation and programming of the BC is carried out with the MID.

The menu displays change as each function is called up for programming/resetting purposes. this includes the changeover functions for the clock, mileage and MPG displays.

BC functions can be displayed in the cluster matrix by pressing the turn signal lever as in the past.

The cluster displays can be programmed for number of displays and order of appearance.

Setting a code with the BC will override the EWS cancellation of the drive away protection when the correct key is used.

An emergency deactivation is possible for the CODE function. A 10 minute wait time is required after disconnect/re-connection of the battery before the code is canceled.