Torque
Cylinder Head Bolts| Head Bolts With cast iron block. | Thread | Tightening Specs. | Measure |
| Jointing Torque | M10 | - Replace wash and oil screws. | 30 Nm |
| Torque Angle | -- | 1st step | 90 degs. |
| Torque Angle | -- | 2nd step | 90 degs. |
| Head Bolts With cast iron block. | Thread | Tightening Specs. | Measure |
| Jointing Torque | M10 | - Replace wash and oil screws. | 30 Nm |
| Torque Angle | -- | 1st step | 90 degs. |
| Torque Angle | -- | 2nd step | 90 degs. |