Computers/Controls - Custom Configuration

Group 09
Programming/Coding
Explanations

Bulletin Number
09 01 98

Woodcliff Lake, NJ
April 1998
Product Engineering

This Service Information bulletin supersedes S.I. 08 01 98 Group 09, dated April 1998 which should be removed and discarded from your S.I. binder. The bulletin number has been corrected to 09 01 98.

THIS SERVICE BULLETIN SHOULD ALSO BE CIRCULATED TO SERVICE ADVISORS AND THE SALES DEPARTMENT.

SUBJECT:
Custom Configuration of "Car Memory"

MODEL:
ALL

Situation:

With the introduction of each successive ZCS Coding software update (IDC 07 02 96) comes increasing control module customizing choices (car memory) for the customer to consider. The purpose of this bulletin is to list these choices found in the DIS ZCS Coding software under Conversion. The customer should be made aware of these choices when the vehicle is ordered and the changes can be made by the BMW Center service department during the QC 1. Vehicle individualization is not reimbursable under warranty. Individualizing your customer's vehicle is an important contribution to a positive customer experience. This bulletin will be updated as new custom configuration options become available. Italicized chart configurations denote default values (values that the vehicle was delivered with).

Included is a form which may be used during the delivery process.




















Custom Configurations Options








Car Memory Custom Configuration