Downloading Programs Into the MoDiC With the MS

Downloading Programs Into The MoDiC With The MS
- Make sure the MS is switched OFF (ON/OFF power switch is located on back of MS).
- Place the MoDiC on the MS preformed tray making sure it is seated correctly.
- Insert disc A of the program you wish to load into the MS 3.5" disc drive.
- Switch the power switch on the back of the MS to ON.


- The MS will run through its' start up procedure and the screen will display "Download Active". This download display only refers to the installation of the MS operating system into the MoDiC.

- Enter the 5 digit Password and press the enter button.

- Select "2 Load Diskette" from the main menu and press enter The MoDiC will display the contents of the loaded disc.

- Select the program you want to load and press the enter button. A bar graph will display representing the contents being loaded. If the program is on more than one disc a display will prompt you to remove the first one and insert the next disc (do not remove the disc until the green light on the disc drive is off).
- With the second disc in the disc drive press "2 Load Diskette" a second time. The bar graph will continue until the program is completely loaded.
- The MoDiC will then request the dealer number to be entered. This completes the program loading sequence.