Instrument Panel Bulb: Service and Repair

Replacing Bulbs In Instrument Carrier





- Remove complete instrument cluster.
- Twist defective light bulb with special tool 61 1 138 through approx. 45 °, and remove. If instrument lighting is defective, twist corresponding receptacle through approx. 45 ° and remove. Pull bulb out of holder.

Installation:
- Note correct bulb strength, Bulb chamber could melt in event of excessive bulb power.




1 Excess temperature warning lamp
2 Right turn signal
3 Lighting for instruments
4 Oil pressure
5 High beam
6 Charge control
7 Left turn signal
8 Fuel reserve
9 Front fog lamp
10 Rear fog lights
11 Diesel preheating
12 Diesel diagnosis
13 Not used
14 Light for LCD display
19 Engine control
16 Trailer turn indicator
17 EGS failure
18 Check
19 Wheel-Slip Control (ASC)
20 Seat belt
21 Not used
22 ABS control
23 Brake-pad wear indicator
24 Brake fluid
25 Handbrake
26 Catalytic-converter overtemperature
27 Airbag