Antenna - Keyless Entry: Service and Repair

Removing and Installing Antenna for Electronic Immobilization




- Remove instrument panelling at bottom left.
- Release screws




- Unscrew screw.




- Pull panelling to side out of clips.




- Pull front end of panelling in downward direction and remove.




- Unscrew screw.
- Pull lower section of steering-column casing off upper section.
Installation:
- Check for correct position of lock.




- Slide in special tool 61 3 300 with flattened end (A) facing ring antenna and lever out ring antenna.




- Cut open cable connector and remove ring antenna.