FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.

Engine Controls - OBD II Training And Manual

Group 12
Engine Electrical Systems

Bulletin Number
12 O3 98

Woodcliff Lake, NJ
July 1998
Product Engineering

SUBJECT:
On-Board Diagnostic II Training Manual

MODEL:
E36 - 318i/it/iA (M44), 323i/iA (M52), 328i/iA (M52), M3 (S52)
E38 - 740i/iA (M62), 750i/iA (M73)
E39 - 528i/iA (M52), 540i/iA (M62)
E31 - 840iCA (M62)
Z3 - with M44, M52 & 552

General Information:

With the introduction of the 1996 model year a new emissions monitoring system (OBD II) was introduced. OBD II requires that all systems/components that can affect emissions be monitored and that the "Check Engine" lamp be illuminated whenever such a fault occurs. The enclosed On-Board Diagnostics II publication provides information on the following:

^ Overview of OBD Program

^ OBD II Drive Cycles

^ Check Engine Light Illumination

^ Oxygen Sensor Monitoring

^ Catalyst Monitoring

^ Misfire Detection

^ Evaporative Emission System Monitoring

^ Secondary Air System Monitoring

^ Fuel System Monitoring

Also enclosed with this publication is a partial listing of fault codes and an explanation of why a particular fault may set with the MS 41.1, MS 41.2, M5.2 or M5.2.1 Engine Management Systems. The fault code information provided is only a supplement to the normal DIS diagnostics and test modules.

This publication is being distributed to Service Managers as a reference source for all diagnostic technicians working on OBD related issues. All technicians will receive a copy of this publication when attending the On-Board Diagnostics II (ST060) technical training course. The enclosed manual is not a substitute for the course, as the course provides two days of in-depth system explanations plus hands-on troubleshooting of the various systems and various diagnostic tools/methods.





One copy of this manual will be sent to each Service Manager at a cost of $10.00 per manual. Additional copies can be ordered from Product Engineering (a pre-printed order form is enclosed).

Item No. Description Qty. Price

92-108 On-Board Diagnostic II 1 $10.00
Training Manual