Cylinder Block Measurements
Cylinder BoreNew or recon.
| Bore dia. | mm | 84.000 (+0.010) |
| 1. Grinding dimension only with cast iron liners. | mm | 84.250 (+0.010) |
| 1. Grinding dimension only with cast iron engine blocks. | mm | 84.250 (+0.010) |
| 2. Grinding dimension only with cast iron engine blocks | mm | 84.500 (+0.010) |
| Permitted roundness deviation of bore | mm | 0.005 |
| Permitted conicity of cylinder bore | mm | 0.010 |
| Permitted total wear clearance between piston/cylinder engine run in | mm | 0.15 |