Arm Rest: Service and Repair

Removing and installing/replacing armrest on rear-seat backrest (saloon/sedan)







Removing and installing armrest:
Remove armrest (1) towards rear/upwards (spring (2) is pressed) from guide sleeve (3).







Removing and installing cup holder:
Open drawer.
Press cup holder (1) towards right (A) and lever out upwards towards left (B).







Removing and installing drawer:


NOTE:
The special tool 00 9 321 (folding leg) is required twice.
To remove, use side (2) of special tool 00 9 321 (folding leg)







NOTE: The drawer (1) has two stops (2) which contact the two stops (4) in the armrest (3) when the drawer is pulled out; these stops (2 and 4) must be removed for disassembly purposes.







Open drawer.
Insert the special tool 00 9 321 (folding leg) twice until the stops are levered out.
Unlatch handle (1) and at same time withdraw drawer (2) from armrest (3).