With Trailing Arm Installed

Replacing a rubber mount in semi-trailing arm, front

Caution: After completion of work, perform chassis alignment check, refer to Wheels, Tires and Alignment.





Remove wheel: refer to Wheels, Tires and Alignment.
Unfasten screws.





Unfasten screws and pull trailing arm downwards.
Further work, refer to "With Trailing Arm Removed".

Installation:
Tightening Torque: 77 Nm.

Note: Damaged threads in bushes on body side can be repaired with Helicoil thread inserts M 12 X 1.5 X 18. The Helicoil thread inserts must be fitted flush with the original thread.