TIS Loading Instructions For DIS Tester

Loading time is approximately 1.5 hours. Only load the TIS CD. Reloading the DIS diagnostic CD or the Basis system CD is not required!

1. Select "Administration" at the main menu.

2. Highlight the TIS drive.

3. Deactivate the TIS drive.

4. Insert the new TIS 7/97 CD label up in the CD carrier.

5. Insert the CD carrier in the drive clear side up, arrow first.

6. Highlight the TIS drive.

7. "Activate" drive.

8. Select "TIS Installation".

9. Select "OK".

10. When the software has finished loading select "OK".

11. Select "End".

12. Select "Quit".