Installation Instructions

BMW SERVICE INFORMATION INDEX PROGRAM

INSTALLATION INSTRUCTIONS

The following instructions will install/update your Service Information Bulletin Index and Retrieval Software.

Please follow these instructions to install (or update the existing) Service Information Bulletin Index program on your PC.

1) Turn computer ON.

2) Open diskette drive door.

3) Insert diskette into drive A with label side up and towards you. Do not force or bend the diskette.

4) Exit your DOS menu and answer "NO" to backup.

5) At the "C: DOS>" prompt, type the command "A:INSTALL" and press ENTER.

NOTE
Some PCs are not configured to display the correct prompt. If this occurs type the command "PROMPT $P$G" and press ENTER to display accurate directory listings.

EXAMPLE: Exiting the DCS menu and the prompt reads "C:\>" or "C>" instead of "C:\DCS>"

6) Installation screen will appear; it will prompt the user to:

a. Press any key to continue installation.

b. Press the "Ctrl" and "Pause/Break" key at the same time to cancel installation.

7) When installation is complete a "0:">" prompt will appear.

8) If the prompt does not read "0: DCS>", type command "CD DOS" and press ENTER.

9) Entering and Exiting the Program:

a. At the "C: DCS>" prompt, type the command "ANA". This will execute the Service Information program.

b. At the "0: DCS>" prompt, type the command "AUTOEXEC". This will execute the DCS menu.