Single Lock - Phase 2

SINGLE LOCK - PHASE 2, ACTIVATION OF ACTUATORS AT ALL DOOR LOCKS







As soon as the module receives the lock signal it activates internal relay #1 providing power through the closed, single lock contact to the actuator motor, through the module's closed contact of relay #3 to ground.

All of the vehicle's actuator motors are energized until the single lock circuit is opened by the gear driven slider (blue). The actuators stop at the single locked position.

At this point the external door handles are decoupled from the latch mechanism preventing entry from outside of the vehicle.

If the internal door handle, the lock buttons or the central lock button on the center console are operated, the door returns to unlock mechanically and can be opened.