Rear

- Remove rear wheels.
- Draw off brake fluid with a syringe, which is used exclusively with brake fluids.



- Disconnect brake line.

Installation note:
- Bleed brakes. Service and Repair

Exploded View:

- Unscrew bolts (1).
- Right side: Pull off brake pad wear indicator plug.
- Pull off caliper toward rear.

Installation note:
- Tightening torque: 67 Nm.

- Reverse procedure to install.




Important:
- Check routing and securing of wire for brake pad wear indicator.
- Check for secure holding with tab of dust cap.
- Rubbing of wire on wheel rim must always be avoided.

NOTE: For additional information see Removal, and Installation Notes. Fundamentals and Basics