Front Speed Sensor

- Install in reverse order. Pay attention to installation notes.





REMOVE
- Turn ignition "Off".
- Unscrew socket head bolt.





- Pull out pulse sensor.

Installation Note: Check pulse sensor for damage, replacing if necessary. Lubricate pulse sensor and housing with Molykote Long-term 2 prior to installation.





- Disconnect plug in engine compartment.
- Push wires down.
- Lift out wires.

INSTALL
- Install in reverse order. Pay attention to installation notes.

NOTE: Sensor adjustment is not possible. Spacing is maintained by installation hole in case of front pulse sensors.

- Check Antilock Brake System (ABS) for proper operation.