Undefined MoDic(R) Software: Overview
Bulletin #: 08 03 96Date: April 1996
System: MODIC
Version: C7.0 coding ZCS
Model: All
Control Module: See list
Subject:
Undefined MODIC Software
Situation:
This IDC supersedes IDC 08 03 96 (V.15.0 ZCS Coding) dated March 1996. Please remove and discard 08 03 96 dated March 1996 from your binder.
Program Highlights
^ With the introduction of C7.0 ZCS software a new numbering system takes effect. Outlined below are the details of the change.
1. The change is applicable for all MODIC and DIS software.
2. All future software versions of diagnostic and programming software will start at a base number of 7.x.
3. To easily distinguish between the different types of software (diagnostic, coding, programming) a letter will precede the version number.
Diagnostic software = D7.x
Coding software = C7.x
Programming software = P7.x
DIS CD = CD7.x
4. MODIC software (MODIC station and DIS download) will contain the same information as long as the version number is the same. Example: The following coding software's will contain identical coding information.
C7.0 MODIC station software
and
C7.0 MODIC download software (from DIS)
5. MODIC software diskettes will have color coded labels for easy identification. The color codes will be as follows.
Diagnostic -- blue
Coding -- white
Programming -- green
^ Updated information for all models.
^ Only codable control modules (on the vehicle in question) are displayed on the MODIC screen. The Central Coding Key determines which control modules are codable.
^ Central Coding Key - The E39 and the Z3 use a 37 digit instead of a 48 digit Central Coding Key. If the Central Coding Key is altered (via conversion), write the new Central Coding Key on a label. Affix the label to the appropriate vehicle Central Coding Key sticker location. Place the new label next to the old label. Cross out the old label. Label location -
E39 - In the right side of the trunk next to the fusible link
Z3 - On the bottom side of the E-Box lid
^ After replacement the following control modules require coding with C7.0. When coding is complete check the control modules fault memory and erase any faults present.
SERIES CONTROL MODULE REMARKS
E31 EML IIIs, PWG M73
EKM/INSTRUMENT CLUSTER
GM (ZKEII)
LKM
EWS II FROM 1/95
DWA II, DWA IV
AIRBAG FROM 9/93
LSM
ASC/DSC FROM 9/93
EDC III, EDC III +
E32 INSTRUMENT CLUSTER
DWA III, DWA IV
LSM
EDC III, EDC III +
E34 INSTRUMENT CLUSTER
ZVM II
EWS FROM 1/95
DWA III, DWA IV
AIRBAG
LSM
IHR, IHKR2, IHKR3
ABS/ASC V FROM 9/93
EDC III, EDC III +
E36 INSTRUMENT CLUSTER
ZVM II, GME (ZKE IV)
BC V
BC (E36 COMPACT)
EWS FROM 1/95
AIRBAG FROM 9/93
CVM
GR II FROM 9/94
IHKA, IHKR
ASC+T FROM 10/91
E38 EML IIIS, PWG M73
IKE
GM (ZKE III)
CCM
LM/LCM
EWS FROM 1/95
AIRBAG
GR II
IHKA, IHKR
ABS/ASC V
EDC III +
E39 INSTRUMENT CLUSTER/IKE
GM (ZKE III)
LCM
EWS
AIRBAG
GR II
IHKA
ABS/ASC V
EDCIV
Overview of Conversions
DISKETTE CONTENTS