Electrical Connector - Probing Kit
88BMW02GROUP 04 Tools and Equipment
Bulletin Number 04 01 88 (1558) Page 1 of 2
Montvale, NJ January 1988 Technical Dept.
SUBJECT: BMW Connector Test Kit
When probing electrical connectors to take voltage, resistance and amperage readings, damage can occur to the individual pins in the electrical connector if improper probes (paper clips, screwdrivers etc.) are used.
The result will be poor fit of this connector when reassembled. To prevent this possibility, BMW is pleased to announce the BMW Connector Test Kit (P/N 88 88 6 900 322).
BMW Connector Test Kit
P/N 88 88 6 900 322
Introductory Price: $87.41
This kit is composed of 28 connectors, three patch cords, two mini-hooks and a molded storage case.
Features of these components are:
^ Connectors - Specifically designed for use with 14 of the most common BMW connectors.
- Flexible to prevent damage to the connector.
- Color coded; male and female connectors of the same size are of the same color for easy identification.
- Fully insulated in silicone rubber.
^ Patch Cords - Separate colors for easy identification.
- Banana plug ends allow for direct plug-in into the Fluke multimeter.
- Silicone rubber insulated to ensure flexibility and a long service life.
^ Mini-Hooks - Allows you to gently hook onto a wire or connector without damage.
- Small size allows you to get into tight places.
A listing of the individual pieces can be found on the attached sheet.
Replacement components are also available and can also be found on the back of the attached sheet.
This tool will be sent to all BMW Automotive Dealers under the Automatic Tool Shipment Program. Additional kits/component parts can be ordered directly from your Parts Distribution Center.
88 88 6 900 322
BMW CONNECTOR TEST KIT
Consists Of:
AVAILABLE FROM BMW SERVICE PARTS
FOR 88 88 6 900 322