Fuel - Throttle EML System Component Replacement
GROUP 12Engine - Electrical
Bulletin Number
12 03 88 (1590)
Montvale, NJ
February 1988
Technical Dept.
SUBJECT:
EML System Component Replacements (including accelerator pedal assembly, throttle valve assemblies, EML control unit, cruise control switch, related harnesses etc.)
MODELS:
All so equipped
Please be advised that until further notice, a 2013 Printout will be required for all EML System Repairs.
The Printout should contain the following information:
1. Initial software page.
2. EML fault memory contents.
3. All pertinent test pages.
The 2013 Printout should be attached to the component in such a way as to insure readable condition later when the part is examined at the factory.
Your cooperation will provide quality control and research/development personnel at BMW AG with vital information necessary for verification of EML repairs and assure continued system improvements, if necessary.
Note:
The intent of this procedure is not to reject warranty claims but to obtain all possible information pertaining to the repair. Thank you for your support and cooperation.